BrowseBrowse by Category
Browse by Category
Switch - L3 - managed - 48 x 1/10/25 Gigabit Ethernet SFP / SFP+ / SFP28 + 6 x 40/100 Gigabit QSFP+ / QSFP28 - back to front airflow - rack-mountable - TAA Compliant
Main Specifications | |
---|---|
Product Description | HPE Aruba CX 10000 - switch - 48 ports - managed - rack-mountable - TAA Compliant |
Device Type | Switch - 48 ports - L3 - managed |
Enclosure Type | Back to front airflow rack-mountable 1U |
Subtype | 25 Gigabit Ethernet |
Ports | 48 x 1/10/25 Gigabit Ethernet SFP / SFP+ / SFP28 + 6 x 40/100 Gigabit QSFP+ / QSFP28 |
Performance | Switching capacity: 3.6 Tbps ¦ Latency: < 1.30 µs ¦ Throughput: 1.94 Mpps |
Capacity | IPv4 hosts: 120000 ¦ IPv6 hosts: 52000 ¦ IPv4 unicast direct routes: 131072 ¦ IPv6 unicast direct routes: 32732 ¦ IGMP groups: 4094 ¦ MLD groups: 4094 ¦ IPv4 routes (Multicast): 4094 ¦ IPv6 routes (Multicast): 4094 ¦ VLANs supported: 4018 |
MAC Address Table Size | 98K entries |
Jumbo Frame Support | 9KB |
Routing Protocol | OSPF, EGP, BGP-4, RIP-2, IGMPv2, IGMP, VRRP, PIM-SM, static IP routing, IGMPv3, GRE, OSPFv3, Multiprotocol BGP, static IPv4 routing, static IPv6 routing, ECMP, policy-based routing (PBR), RIPng, MLDv2, MLD, MSTP, RSTP, STP |
Remote Management Protocol | SNMP, RMON, SNMP 3, SNMP 2c, TFTP, SSH, SSH-2, CLI, SFTP, NTP, ICMP, IPv4, IPv6, RSTP |
Features | Flow control, IP-routing, DHCP support, ARP support, VLAN support, IGMP snooping, port mirroring, IPv6 support, sFlow, STP support, RSTP support, MSTP support, ACL support, QoS, Jumbo Frames support, MLD snooping, BFD, UDLD, IPv4 support, DWRR, LACP, DCB, fan tray, redundant hot swappable fans, congestion control, packet storm protection, SP, Loopback, MSDP, ERPS, VTEP support, ECN, BPDU, ICMP, 32MB packet buffer, VXLAN, Link Aggregation, UDP, PIM, Cisco IPSLA, RSTP, broadcast mode, VSX, Multicast routing, REST API interface |
Compliant Standards | IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1t, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3ba, IEEE 802.1AX |
Power | AC 100-240 V (50 - 60 Hz) |
Power Redundancy | Yes |
Dimensions (WxDxH) | 17.3 in x 20.1 in x 1.7 in |
Weight | 21.49 lbs |
TAA Compliant | Yes |
General | |
Device Type | Switch - 48 ports - L3 - managed |
Enclosure Type | Back to front airflow rack-mountable 1U |
Subtype | 25 Gigabit Ethernet |
Ports | 48 x 1/10/25 Gigabit Ethernet SFP / SFP+ / SFP28 + 6 x 40/100 Gigabit QSFP+ / QSFP28 |
Performance | Switching capacity: 3.6 Tbps ¦ Latency: < 1.30 µs ¦ Throughput: 1.94 Mpps |
Capacity | IPv4 hosts: 120000 ¦ IPv6 hosts: 52000 ¦ IPv4 unicast direct routes: 131072 ¦ IPv6 unicast direct routes: 32732 ¦ IGMP groups: 4094 ¦ MLD groups: 4094 ¦ IPv4 routes (Multicast): 4094 ¦ IPv6 routes (Multicast): 4094 ¦ VLANs supported: 4018 |
MAC Address Table Size | 98K entries |
Jumbo Frame Support | 9KB |
Routing Protocol | OSPF, EGP, BGP-4, RIP-2, IGMPv2, IGMP, VRRP, PIM-SM, static IP routing, IGMPv3, GRE, OSPFv3, Multiprotocol BGP, static IPv4 routing, static IPv6 routing, ECMP, policy-based routing (PBR), RIPng, MLDv2, MLD, MSTP, RSTP, STP |
Remote Management Protocol | SNMP, RMON, SNMP 3, SNMP 2c, TFTP, SSH, SSH-2, CLI, SFTP, NTP, ICMP, IPv4, IPv6, RSTP |
Authentication Method | Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
Features | Flow control, IP-routing, DHCP support, ARP support, VLAN support, IGMP snooping, port mirroring, IPv6 support, sFlow, STP support, RSTP support, MSTP support, ACL support, QoS, Jumbo Frames support, MLD snooping, BFD, UDLD, IPv4 support, DWRR, LACP, DCB, fan tray, redundant hot swappable fans, congestion control, packet storm protection, SP, Loopback, MSDP, ERPS, VTEP support, ECN, BPDU, ICMP, 32MB packet buffer, VXLAN, Link Aggregation, UDP, PIM, Cisco IPSLA, RSTP, broadcast mode, VSX, Multicast routing, REST API interface |
Compliant Standards | IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1t, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3ba, IEEE 802.1AX |
Processor | 1: 2.9 GHz |
RAM | 32 GB |
Flash Memory | 64 MB |
Built-in Devices | 64 GB SSD |
Expansion / Connectivity | |
Interfaces | 1 x serial RJ-45 ¦ 1 x console (USB) ¦ 1 x console (micro-USB) ¦ 1 x LAN RJ-45 management ¦ 6 x 100Gbit/40Gbit LAN ¦ 48 x 1/10/25Gbit LAN |
Miscellaneous | |
Included Accessories | 6 x fans |
Rack Mounting Kit | Optional |
Compliant Standards | EMC, ICES-003 Class A, RoHS, Laser Class 1, VCCI Class A, EN 50581:2012, CNS 13438 Class A, AS/NZS CISPR 32 Class A, EN 55032:2015, IEC/EN60950-1:2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013, CISPR 32 Class A, CAN/CSA-C22.2 No. 62368-1, UL 62368-1, EN 55035, CISPR 35, EN 60825-1:2014, IEC/EN 62368-1, IEC 60825-1:2014 Class 1, CAN/CSA-C22.2 No. 62368-1 Third Edition, UL 62368-1 Third Edition, KS C 9832 Class A, KS C 9835, FCC CFR 47 Part 15: 2018 Class A, IEC/EN 62368-1 Second Edition, IEC/EN 62368-1 Third Edition |
TAA Compliant | Yes |
Power | |
Power Device | Internal power supply - hot-plug |
Installed Qty | 2 |
Max Supported Qty | 2 |
Power Redundancy | Yes |
Power Redundancy Scheme | N+1 |
Power Provided | 550 Watt |
Voltage Required | AC 100-240 V (50 - 60 Hz) |
Environmental Parameters | |
Min Operating Temperature | 32 °F |
Max Operating Temperature | 104 °F |
Humidity Range Operating | 10 - 85% (non-condensing) |
Min Storage Temperature | -40 °F |
Max Storage Temperature | 158 °F |
Humidity Range Storage | 5 - 95% |
Dimensions & Weight | |
Width | 17.3 in |
Depth | 20.1 in |
Height | 1.7 in |
Weight | 21.49 lbs |