Product Description
|
Allied Telesis AT x510-28GSX - switch - 24 ports - managed - rack-mountable
|
Device Type
|
Switch - 24 ports - L2+ - managed - stackable
|
Enclosure Type
|
Front to back airflow rack-mountable 1U
|
Subtype
|
Gigabit Ethernet
|
Ports
|
24 x SFP + 2 x 10 Gigabit Ethernet / 1 Gigabit Ethernet SFP+ + 2 x 10 Gigabit SFP+
|
Performance
|
Switching capacity: 128 Gbps ¦ Forwarding performance: 95.2 Mpps ¦ Stacking bandwidth: 40 Gbps
|
Capacity
|
MAC addresses: up to 16000 ¦ Virtual interfaces (VLANs): 4094 ¦ IPv4 routes: up to 2000 ¦ IPv6 routes: up to 1000
|
MAC Address Table Size
|
16K entries
|
Jumbo Frame Support
|
13KB
|
Routing Protocol
|
IGMPv2, IGMPv3, ECMP, policy-based routing (PBR), VRRPv3
|
Remote Management Protocol
|
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, SSH-2, CLI
|
Features
|
Flow control, BOOTP support, ARP support, VLAN support, IGMP snooping, Syslog support, traffic shaping, DoS attack prevention, port mirroring, DiffServ support, WRR queuing, MAC address filtering, IPv6 support, firmware upgradable, WRED, sFlow, RSTP support, VLAN Stacking, MSTP support, DHCP snooping, TFTP support, ACL support, QoS, NAC, Jumbo Frames support, DAI, PVST+, ECMP, STP Root Guard, LACP support, LLDP support, SNMP trap, DNS relay, Energy Efficient Ethernet, GVRP, loop prevention, enviromental monitoring, Ingress Layer 2 MAC ACLs, tagged VLAN, 4MB packet buffer
|
Compliant Standards
|
IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX
|
Power
|
AC 120/230 V (50/60 Hz)
|
Power Redundancy
|
Yes
|
Dimensions (WxDxH)
|
17.3 in x 11.4 in x 1.7 in
|
Weight
|
12.35 lbs
|
System Requirements
|
AlliedWare Plus
|
Device Type
|
Switch - 24 ports - L2+ - managed - stackable
|
Enclosure Type
|
Front to back airflow rack-mountable 1U
|
Subtype
|
Gigabit Ethernet
|
Ports
|
24 x SFP + 2 x 10 Gigabit Ethernet / 1 Gigabit Ethernet SFP+ + 2 x 10 Gigabit SFP+
|
Performance
|
Switching capacity: 128 Gbps ¦ Forwarding performance: 95.2 Mpps ¦ Stacking bandwidth: 40 Gbps
|
Capacity
|
MAC addresses: up to 16000 ¦ Virtual interfaces (VLANs): 4094 ¦ IPv4 routes: up to 2000 ¦ IPv6 routes: up to 1000
|
MAC Address Table Size
|
16K entries
|
Jumbo Frame Support
|
13KB
|
Max Units In A Stack
|
4
|
Routing Protocol
|
IGMPv2, IGMPv3, ECMP, policy-based routing (PBR), VRRPv3
|
Remote Management Protocol
|
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, SSH-2, CLI
|
Encryption Algorithm
|
DES, Triple DES, RSA, MD5, SHA-1, TLS 1.0, SSL 3.0, SSL 2.0, PEAP, TTLS
|
Authentication Method
|
Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2), Extensible Authentication Protocol (EAP)
|
Features
|
Flow control, BOOTP support, ARP support, VLAN support, IGMP snooping, Syslog support, traffic shaping, DoS attack prevention, port mirroring, DiffServ support, WRR queuing, MAC address filtering, IPv6 support, firmware upgradable, WRED, sFlow, RSTP support, VLAN Stacking, MSTP support, DHCP snooping, TFTP support, ACL support, QoS, NAC, Jumbo Frames support, DAI, PVST+, ECMP, STP Root Guard, LACP support, LLDP support, SNMP trap, DNS relay, Energy Efficient Ethernet, GVRP, loop prevention, enviromental monitoring, Ingress Layer 2 MAC ACLs, tagged VLAN, 4MB packet buffer
|
Compliant Standards
|
IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX
|
RAM
|
512 MB DDR SDRAM
|
Flash Memory
|
64 MB
|
Built-in Devices
|
LED panel
|
Status Indicators
|
Fail, status
|