Network Advantage - switch - L3 - managed - 60 x 10/25/50 Gigabit Ethernet SFP56 + 4 x 40 Gigabit / 100 Gigabit / 200 Gigabit / 400 Gigabit QSFP-DD - rack-mountable
| Main Specifications | |
|---|---|
| Product Description | Cisco Catalyst 9500X-60L4D - Network Advantage - switch - 60 ports - managed - rack-mountable |
| Device Type | Switch - 60 ports - L3 - managed |
| Enclosure Type | Rack-mountable 1U |
| Subtype | 50 Gigabit Ethernet |
| Ports | 60 x 10/25/50 Gigabit Ethernet SFP56 + 4 x 40 Gigabit / 100 Gigabit / 200 Gigabit / 400 Gigabit QSFP-DD |
| Performance | Switching capacity: up to 9.2 Tbps ¦ Forwarding rate: 8 Bpps |
| Capacity | Indirect IPv4 routes: 2000000 ¦ Host IPv4 routes: 256000 ¦ Indirect IPv6 routes: 1000000 ¦ Host IPv6 routes: 128000 ¦ IPv4 routes (Multicast): 32000 ¦ IPv6 routes (Multicast): 16000 ¦ QoS ACL scale: 8000 ¦ Security ACL scale: 8000 ¦ FNF entries: 2000000 ¦ VLAN IDs: 4094 ¦ PVST instances: 4094 ¦ STP Virtual Ports for PVST: 32000 ¦ STP Virtual Ports for MST: 32000 ¦ Switched virtual interfaces (SVIs): 4096 |
| MAC Address Table Size | 256K entries |
| Jumbo Frame Support | 9216 bytes |
| Routing Protocol | OSPF, RIP, BGP-4, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, OSPFv2, PIM-SM, static IP routing, EIGRP for IPv6, GRE, OSPFv3, PIM-SSM, MSDP, policy-based routing (PBR), RIPng, MPLS, BGP for IPv6, MSTP, STP, LISP, IS-ISv4, mVPN |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, HTTP, CLI, NETCONF, RESTCONF, gRPC, YANG |
| Features | IP-routing, VPN support, full duplex mode, NSF, QoS, LACP support, RSPAN, NetFlow, VRF, SPQ, IPFIX, FNF, 802.1x authentication, PTP, MACsec support, VOQ, built-in ASIC, CoPP, VXLAN, LISP, TrustSec support, EoMPLS, HQoS, Blue Beacon LED, ZTP, CoAP support, secure boot, SPAN, SGT caching, FHS, MQC, AVB, PVLAN support, TrustAnchor module, GIR mode, image signing, CDP, BSR Mechanism, Cisco UADP, VXLAN Distributed Anycast Gateway, trustworthy systems |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ba |
| Power Redundancy | Optional |
| Dimensions (WxDxH) | 17.5 in x 21.8 in x 1.7 in |
| Weight | 20.97 lbs |
| System Requirements | Cisco IOS XE 17.10.1 or later |
| Manufacturer Warranty | Limited lifetime warranty |
| General | |
| Device Type | Switch - 60 ports - L3 - managed |
| Enclosure Type | Rack-mountable 1U |
| Subtype | 50 Gigabit Ethernet |
| Ports | 60 x 10/25/50 Gigabit Ethernet SFP56 + 4 x 40 Gigabit / 100 Gigabit / 200 Gigabit / 400 Gigabit QSFP-DD |
| Performance | Switching capacity: up to 9.2 Tbps ¦ Forwarding rate: 8 Bpps |
| Capacity | Indirect IPv4 routes: 2000000 ¦ Host IPv4 routes: 256000 ¦ Indirect IPv6 routes: 1000000 ¦ Host IPv6 routes: 128000 ¦ IPv4 routes (Multicast): 32000 ¦ IPv6 routes (Multicast): 16000 ¦ QoS ACL scale: 8000 ¦ Security ACL scale: 8000 ¦ FNF entries: 2000000 ¦ VLAN IDs: 4094 ¦ PVST instances: 4094 ¦ STP Virtual Ports for PVST: 32000 ¦ STP Virtual Ports for MST: 32000 ¦ Switched virtual interfaces (SVIs): 4096 |
| MAC Address Table Size | 256K entries |
| Jumbo Frame Support | 9216 bytes |
| Routing Protocol | OSPF, RIP, BGP-4, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, OSPFv2, PIM-SM, static IP routing, EIGRP for IPv6, GRE, OSPFv3, PIM-SSM, MSDP, policy-based routing (PBR), RIPng, MPLS, BGP for IPv6, MSTP, STP, LISP, IS-ISv4, mVPN |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, HTTP, CLI, NETCONF, RESTCONF, gRPC, YANG |
| Encryption Algorithm | 256-bit IKEv2, 256-bit ESP, 256-bit IPsec |
| Features | IP-routing, VPN support, full duplex mode, NSF, QoS, LACP support, RSPAN, NetFlow, VRF, SPQ, IPFIX, FNF, 802.1x authentication, PTP, MACsec support, VOQ, built-in ASIC, CoPP, VXLAN, LISP, TrustSec support, EoMPLS, HQoS, Blue Beacon LED, ZTP, CoAP support, secure boot, SPAN, SGT caching, FHS, MQC, AVB, PVLAN support, TrustAnchor module, GIR mode, image signing, CDP, BSR Mechanism, Cisco UADP, VXLAN Distributed Anycast Gateway, trustworthy systems |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ba |
| Processor | X Intel: 2.43 GHz |
| RAM | 32 GB |
| Flash Memory | 16 GB |
| Built-in Devices | RFID tag |
| Status Indicators | Status |
| Expansion / Connectivity | |
| Interfaces | 60 x 10/25/50GBase-X SFP56 ¦ 4 x 40/100/200/400GBase-X QSFP-DD ¦ 1 x USB-C management |
| Manufacturer Warranty | |
| Service & Support | Limited hardware warranty - replacement - lifetime - response time: next business day / same day shipment |
| Miscellaneous | |
| MTBF | 133,260 hours |
| Compliant Standards | AS/NZS 60950-1, UL 60950-1, IEC 60950-1, WEEE, EN 300 386 V1.6.1, EN 61000-3-3:2013, EN 61000-3-2:2014, EN 55024:2010+A1:2015, EN 62368-1, IEC 62368-1, ICES-003:2016 issue 6 Class A, EN 55032:2015 Class A, CAN/CSA-C22.2 No. 62368-1, CAN/CSA-C22.2 No. 60950-1, UL 62368-1, VCCI-CISPR 32:2016, CISPR 24:2010+A1:2015, CNS13438:2006 Class A, AS/NZS 62368-1, 47 CFR Part 15:2016, CISPR32:2015:Ed:2, KS C 9835:2019, EN 55032:2012/AC:2013 Class A, EN 55035:2017+A11:2020, KS C 9832:2019, CISPR 32 Second Edition Class A |
| Power | |
| Power Device | Internal power supply - hot-plug |
| Installed Qty | 0 |
| Max Supported Qty | 2 |
| Power Redundancy | Optional |
| Power Redundancy Scheme | 1+1 |
| Software / System Requirements | |
| OS Required | Cisco IOS XE 17.10.1 or later |
| Environmental Parameters | |
| Min Operating Temperature | 23 °F |
| Max Operating Temperature | 95 °F |
| Humidity Range Operating | 10 - 85% RH (non-condensing) |
| Min Storage Temperature | -40 °F |
| Max Storage Temperature | 158 °F |
| Humidity Range Storage | 0 - 95% RH (non-condensing) |
| Dimensions & Weight | |
| Width | 17.5 in |
| Depth | 21.8 in |
| Height | 1.7 in |
| Weight | 20.97 lbs |