Switch - managed - 8 x 64Gb Fibre Channel SFP+ - front to back airflow - rack-mountable - with 8x 64 Gbps SW SFP+ transceiver
| Main Specifications | |
|---|---|
| Product Description | Cisco MDS 9124V - switch - 24 ports - managed - rack-mountable - with 8x 64 Gbps SW SFP+ transceiver |
| Device Type | Switch - 24 ports - managed - with 8x 64 Gbps SW SFP+ transceiver |
| Enclosure Type | Front to back airflow rack-mountable 1U |
| Subtype | Fibre Channel |
| Ports | 8 x 64Gb Fibre Channel SFP+ |
| Performance | Aggregate bandwidth: 1.5 Tbps |
| Remote Management Protocol | RMON, SNMP 3, HTTP, HTTPS, SMI-S, SSH-2, CLI, SFTP, LDAP |
| Features | Syslog support, ACL support, FEC, RSCN support, Diagnostic Function, Loopback, ISSU, built-in ASIC, FCS, Cisco ISL, RBAC, TrustSec support, POST, AAA, secure boot, EEM, hot swap fan tray, broadcast mode, OHMS, SPAN mode, zone-based QoS, flow-based QoS, Link Diagnostic, CLI management |
| Power | AC 100-240 V (50/60 Hz) |
| Power Redundancy | Yes |
| Dimensions (WxDxH) | 17.3 in x 18 in x 1.7 in |
| Weight | 18.74 lbs |
| Manufacturer Warranty | 1-year warranty |
| General | |
| Device Type | Switch - 24 ports - managed - with 8x 64 Gbps SW SFP+ transceiver |
| Enclosure Type | Front to back airflow rack-mountable 1U |
| Subtype | Fibre Channel |
| Ports | 8 x 64Gb Fibre Channel SFP+ |
| Performance | Aggregate bandwidth: 1.5 Tbps |
| Fibre Channel | FC-DA, FC-FLA, FC-FS, FC-GS-3, FC-GS-4, FC-MI, FC-PH, FC-PH-2, FC-PH-3, FC-PI, FC-PLDA, FC-SB-2, FC-SB-3, FC-SW-2, FC-SW-3, FC-Tape, FC-VI, FC-SP, FCP-4, FC-BB-2, FCP, FCP-2, FC-PI-2, FC-BB-5, FC-BB-3, FC-FS-2, FC-GS-5, FC-SW-4, FCP-3, FC-MI-2, FC-PI-4, FC-FS-3, FC-GS-6, FC-PI-3, FC-SW-5, FC-BB-4, FC-IFR, FAIS, FAIS-2, FC-PI-5, FC-LS-2, FC-SP-2, FC-SB-4, FC-DA-2, FC-MI-3, FC-MSQS, FC-BB-6, FC-SB-5, RFC2625, FC-FS-4, FC-SW-6, FC-GS-7, FC-PI-6, FC-GS-8, FC-LS-3, FC-SW-7, FC-NVMe, FC-FS-5, FC-PI-7, FC-LS-4, FC-NVMe-2, FC-PH-1, F-LS |
| Remote Management Protocol | RMON, SNMP 3, HTTP, HTTPS, SMI-S, SSH-2, CLI, SFTP, LDAP |
| Encryption Algorithm | AES |
| Authentication Method | RADIUS, TACACS+, Secure Shell v.2 (SSH2), LDAP |
| Features | Syslog support, ACL support, FEC, RSCN support, Diagnostic Function, Loopback, ISSU, built-in ASIC, FCS, Cisco ISL, RBAC, TrustSec support, POST, AAA, secure boot, EEM, hot swap fan tray, broadcast mode, OHMS, SPAN mode, zone-based QoS, flow-based QoS, Link Diagnostic, CLI management |
| Status Indicators | System |
| Expansion / Connectivity | |
| Interfaces | 8 x 64Gb Fibre Channel SFP+ ¦ 1 x 10/100/1000 Base-T RJ-45 management ¦ 1 x USB Type A ¦ 1 x serial (RS-232) console ¦ 16 x 64Gb Fibre Channel SFP+ Ports on Demand |
| Manufacturer Warranty | |
| Service & Support | Limited warranty - replacement - 1 year - response time: 10 days |
| Miscellaneous | |
| Compliant Standards | CISPR 22 Class A, EN 60950, EN 61000-3-2, IEC 60950, EN 61000-3-3, EN55024, UL 60950, EN50082-1, EN 61000-6-1, AS/NZS 3260, EMC, ICES-003 Class A, EN 60825, AS/NZS 3548 Class A, IEC 60825, CAN/CSA C22.2 No. 60950, VCCI Class A, EN 55022 Class A, FCC CFR47 Part 15 A, 21 CFR 1040, TS001, Safety certification |
| Power | |
| Power Device | Internal power supply - hot-plug |
| Installed Qty | 2 |
| Max Supported Qty | 2 |
| Power Redundancy | Yes |
| Power Provided | 500 Watt |
| Voltage Required | AC 100-240 V (50/60 Hz) |
| 80 PLUS Certification | 80 PLUS Platinum |
| Features | Side Intake airflow |
| Environmental Parameters | |
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 104 °F |
| Humidity Range Operating | 10 - 90% (non-condensing) |
| Min Storage Temperature | -40 °F |
| Max Storage Temperature | 158 °F |
| Humidity Range Storage | 10 - 95% (non-condensing) |
| Dimensions & Weight | |
| Width | 17.3 in |
| Depth | 18 in |
| Height | 1.7 in |
| Weight | 18.74 lbs |