Switch - managed - 24 x 64Gb Fibre Channel SFP+ - back to front airflow - rack-mountable - remanufactured
| Main Specifications | |
|---|---|
| Product Description | Cisco MDS 9124V - switch - 24 ports - managed - rack-mountable |
| Device Type | Switch - 24 ports - managed |
| Enclosure Type | Back to front airflow rack-mountable 1U |
| Subtype | Fibre Channel |
| Ports | 24 x 64Gb Fibre Channel SFP+ |
| Performance | Aggregate bandwidth: 1.5 Tbps |
| Remote Management Protocol | SNMP 3, SMI-S, HTTP, HTTPS, SFTP, CLI, RMON, LDAP, SSH-2 |
| Features | Built-in ASIC, ACL support, Cisco ISL, Diagnostic Function, FEC, RBAC, AAA, TrustSec support, secure boot, POST, OHMS, Loopback, SPAN mode, Syslog support, Link Diagnostic, ISSU, hot swap fan tray, CLI management, EEM, RSCN support, FCS, broadcast mode, flow-based QoS, zone-based QoS |
| Power | AC 100-240 V (50/60 Hz) |
| Power Redundancy | Yes |
| Dimensions (WxDxH) | 17.3 in x 18 in x 1.7 in |
| Weight | 18.74 lbs |
| System Requirements | Cisco NX-OS 9.3(1) |
| Pricing Type | Remanufactured |
| Manufacturer Warranty | 1-year warranty |
| General | |
| Device Type | Switch - 24 ports - managed |
| Enclosure Type | Back to front airflow rack-mountable 1U |
| Subtype | Fibre Channel |
| Ports | 24 x 64Gb Fibre Channel SFP+ |
| Performance | Aggregate bandwidth: 1.5 Tbps |
| Fibre Channel | FC-PI-6, FAIS, FAIS-2, FC-BB-2, FC-BB-3, FC-BB-4, FC-BB-5, FC-BB-6, FC-DA, FC-DA-2, FC-FLA, FC-FS-1, FC-FS-2, FC-FS-3, FC-FS-4, FC-FS-5, FC-GS-3, FC-GS-4, FC-GS-5, FC-GS-6, FC-GS-7, FC-GS-8, FC-IFR, FC-LS, FC-LS-2, FC-LS-3, FC-LS-4, FC-MI, FC-MI-2, FC-MI-3, FC-MSQS, FC-NVMe, FC-NVMe-2, FCP, FCP-2, FCP-3, FCP-4, FC-PH-1, FC-PH-2, FC-PH-3, FC-PI, FC-PI-13, FC-PI-2, FC-PI-3, FC-PI-4, FC-PI-5, FC-PI-7, FC-PLDA, FC-SB-2, FC-SB-3, FC-SB-4, FC-SB-5, FC-SP, FC-SP-2, FC-SW-2, FC-SW-3, FC-SW-4, FC-SW-5, FC-SW-6, FC-SW-7, FC-Tape, FC-VI, RFC2625, FC-PH |
| Remote Management Protocol | SNMP 3, SMI-S, HTTP, HTTPS, SFTP, CLI, RMON, LDAP, SSH-2 |
| Encryption Algorithm | AES |
| Authentication Method | RADIUS, TACACS+, LDAP, Secure Shell v.2 (SSH2) |
| Features | Built-in ASIC, ACL support, Cisco ISL, Diagnostic Function, FEC, RBAC, AAA, TrustSec support, secure boot, POST, OHMS, Loopback, SPAN mode, Syslog support, Link Diagnostic, ISSU, hot swap fan tray, CLI management, EEM, RSCN support, FCS, broadcast mode, flow-based QoS, zone-based QoS |
| Built-in Devices | 4 x fans |
| Expansion / Connectivity | |
| Interfaces | 24 x 64Gb Fibre Channel SFP+ 8 active ports ¦ 1 x 10/100/1000 Base-T RJ-45 management ¦ 1 x serial (RS-232) console ¦ 1 x USB Type A |
| Manufacturer Warranty | |
| Service & Support | Limited warranty - advance hardware replacement - 1 year - response time: 10 days |
| Miscellaneous | |
| Compliant Standards | 21 CFR 1040, AS/NZS 3260, CAN/CSA C22.2 No. 60950, EMC, EN 60825, EN 60950, FCC CFR47 Part 15 2010 Class A, IEC 60825, IEC 60950, Safety certification, TS001, UL 60950, AS/NZS 3548 Class A, CISPR 22 Class A, EN 55022 Class A, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN50082-1, EN55024, ICES-003 Class A, VCCI Class A |
| Pricing Type | Remanufactured |
| Power | |
| Power Device | Internal power supply - hot-plug |
| Max Supported Qty | 2 |
| Power Redundancy | Yes |
| Power Provided | 500 Watt |
| Voltage Required | AC 100-240 V (50/60 Hz) |
| Power Consumption Operational | 146 Watt |
| 80 PLUS Certification | 80 PLUS Platinum |
| Features | Port side exhaust |
| Software / System Requirements | |
| OS Required | Cisco NX-OS 9.3(1) |
| Environmental Parameters | |
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 104 °F |
| Humidity Range Operating | 10 - 90% (non-condensing) |
| Min Storage Temperature | -40 °F |
| Max Storage Temperature | 158 °F |
| Humidity Range Storage | 10 - 95% (non-condensing) |
| Dimensions & Weight | |
| Width | 17.3 in |
| Depth | 18 in |
| Height | 1.7 in |
| Weight | 18.74 lbs |